« previous next »
Pages: [1]   Go Down

Author Topic: Step motor  (Read 2904 times)

Laurel Moore

  • BAC Member
  • *
  • Posts: 36
  • Thanked: 5 times
Step motor
« on: April 17, 2019, 02:42:36 AM »
Any special requirements to replace a step motor on a 2009 beaver
Logged
Laurel Moore
2009 Beaver Contessa 43ft
Toad 2011 Jeep Wrangler

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3509
  • Thanked: 2694 times
Re: Step motor
« Reply #1 on: April 17, 2019, 03:00:06 AM »
Pretty straight forward. This may help:  https://beaveramb.org/acadp_listings/entry-step-problems/
Steve
Logged
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

Laurel Moore

  • BAC Member
  • *
  • Posts: 36
  • Thanked: 5 times
Re: Step motor
« Reply #2 on: April 19, 2019, 07:14:18 PM »
Thanks Steve for your help
Logged
Laurel Moore
2009 Beaver Contessa 43ft
Toad 2011 Jeep Wrangler

Dwight Lakusta

  • Guest
Re: Step motor
« Reply #3 on: April 20, 2019, 03:14:42 PM »
Buy it on amazon! I got mine for a 140 bucks Canadian! So around 100!
Logged

George Harwell

  • Guest
Re: Step motor
« Reply #4 on: April 29, 2019, 05:43:49 PM »
  Replaced mine on 03 Monterey. It was labeled as a pre IMGL motor but was exact fit. took about 20 minutes. Got it from Amazon for $152 with taxes. Lippert part number is 379608 and AM equipment part number is 210-1011.
« Last Edit: April 29, 2019, 07:12:31 PM by George Harwell »
Logged
Pages: [1]   Go Up
« previous next »