Author Topic: Noisy wind sensor  (Read 2750 times)

Roy Boles

  • BAC Member
  • *
  • Posts: 101
  • Thanked: 56 times
Noisy wind sensor
« on: November 13, 2019, 05:15:50 PM »
   Is your wind sensor noisy? Water and wear over time get to the two bearing that are in the upper part of the sensor. The bearing are replaceable. The bearing number is 623ZZ and are available on line. I have some of the bearing. If your going to Indio or Quartzsite I can fix the noise. I had one of the bearing lock up one time and the shaft twisted in two. I had to replace the entire sensor at $150, no fun. Safe travels to all.
'98 Marquis Diamante
C-12/Allison 4000
The following users thanked this post: Jim Nichols