BAC Forum

General Boards => Technical Support => Topic started by: Jeff Johnson on January 08, 2022, 12:40:10 AM

Title: Engine mounts for 3126B
Post by: Jeff Johnson on January 08, 2022, 12:40:10 AM

  Looking to see if there has been any issues with the 96-99 3126B engine mounts in regards to deteriorating  or letting the pump drive coupler go out of alignment.
  My mechanic a Southwest Fleet Repair (here in Phoenix) was asking about them since Maganloy Hytrel insert for the drive coupler appears to be shot after only 8000 miles.

  96' Patriot Savannah 33' 3126B with almost 80,000 miles.

   Thanks all in advance,
   Jeff

Title: Re: Engine mounts for 3126B
Post by: Steve Huber Co-Admin on January 08, 2022, 03:56:23 AM

Jeff,
Suggest you give Tom a call at Masseys Diesel. He would know.
Steve

Title: Re: Engine mounts for 3126B
Post by: Jeff Johnson on January 08, 2022, 04:02:40 AM

Thanks Steve, I tried Massey's first and wasn't able to get in there before the rally at Quartzite.