BAC Forum

General Boards => Technical Support => Topic started by: Jill Goldman on January 16, 2022, 12:19:56 AM

Title: Weep hole covers
Post by: Jill Goldman on January 16, 2022, 12:19:56 AM

Hi Folks,

Getting my 2003 Beaver Patriot ready to sell and I wanted to replace the 16 weep hole covers that are missing. BUT when I finally found the exact one it was listed as discontinued. Can I use any other one? The one I have is SE-GI - 3 11/16" in length.

Thanks,

Jill

Title: Re: Weep hole covers
Post by: Joel Ashley on January 16, 2022, 06:03:02 AM

Model matches, length doesn’t, but
Left side:  https://leisurervparts.com/left-side-window-weep-hole-cover-driver/   

Right side:  https://leisurervparts.com/right-side-weep-hole-cover-passenger/

Title: Re: Weep hole covers
Post by: Mark Nagy on January 14, 2024, 09:31:16 PM

Hello All,
I know this post is 2 years old. but I just created a 3d print file for replacing this particular size weep hole cover which is 3-3/4" long and is not side specific (no left or right).  I believe these are used on the older model beavers. STL file attached.  If you don't have access to a 3d printer, let me know & maybe I can print it for you. :)

Title: Re: Weep hole covers
Post by: Andrew Clare on January 23, 2024, 02:39:05 AM

Here are my 3D printed covers for my 2002 Patriot:

Title: Re: Weep hole covers
Post by: Joel Ashley on January 24, 2024, 03:58:39 AM

Okay, apparently those aren’t links, like Mark’s prior post (stl URL), that most of us can open.