Recent Posts

11

Technical Support / Re: Power steering and Fan Hydraulics

« Last post by Roy Boles on October 09, 2024, 04:48:37 AM »

I had the same problem a couple of years ago. I found it when we were pulling into a camp ground in North Plat NB. When they ran the hydraulic hoses they simply zip tied them together over time they rubbed against each other and caused a leak. Had new hoses made. When I installed them I wrapped any place they came into contact with each other With heater hose and zip tied them together tightly. I did the same to any hose that came into contact with any thing else by wrapping heater hose around the hydraulic hose. It has worked for me so far. Safe travels everyone.

12

Technical Support / Re: creepy window seal repair

« Last post by Keith Moffett on October 08, 2024, 11:21:51 PM »

RV Glass Boss.  I believe they are in Gilbert AZ.  They come to most of the FMCA and a few BAC rallies.  They redid our windows though another place had redone them before and the seals were bad already.  Eight years and no seal creep now. 

13

Technical Support / Re: Rear rock guard

« Last post by Keith Moffett on October 08, 2024, 11:15:58 PM »

Gene
Perhaps they might consider a sponsorship of BAC since there are so many members in the PNW?  Can’t hurt to ask?

14

Technical Support / Re: Rear rock guard

« Last post by Paul Champagne on October 07, 2024, 10:15:05 PM »

Thanks Gene I was in contact with them this morning sent them pics and waiting for their reply

15

Technical Support / Re: ONAN BG 6500LP Generator

« Last post by Gene Obie on October 07, 2024, 07:12:06 PM »

If this isn't it you should be able to find manual on cummins website.

https://www.cummins.com/sites/default/files/rv-manuals/0983-0101.pdf

16

Technical Support / Re: Rear rock guard

« Last post by Gene Obie on October 07, 2024, 07:08:24 PM »

I'm also considering replacing my bent up mudflap.

I'm considering Duraflap https://duraflap.com/product-category/motorhome-mud-flaps-and-rv-mudflaps/ . They have multiple dealers and I'm working with folks in Monroe, WA since I'm just up the road 10mi from them.

Here's a BAC string on the topic if you haven't seen it: http://beaveramb.org/forum/index.php?topic=2810.0

17

Technical Support / Rear rock guard

« Last post by Paul Champagne on October 07, 2024, 06:47:42 PM »

Hello

Our rear mudflap got damaged while trying to lower and level out Coach just wondering where i can get a replacement one as ours is bent up pretty good?

Thanks

Paul  2006 Thunder

18

Technical Support / Re: RPM gauge

« Last post by Scott Hinote on October 07, 2024, 04:23:12 PM »

Okay Eric I was able to get to their website . I’ll contact them and see if they still have it . I’m going to keep their contact because it seems they have many items for RV’s . Thank you .

19

Technical Support / Re: ONAN BG 6500LP Generator

« Last post by Robert Norris on October 07, 2024, 01:54:28 PM »

Thanks Eric.
First off, please call me Bob.
Is there a manual for this gen set?

20

Technical Support / Re: ONAN BG 6500LP Generator

« Last post by Eric Maclean on October 06, 2024, 09:08:35 PM »

Robert
If your getting a grind noise when cranking you may have a sticking starter inertia drive which is not engaging the ring gear properly
By simply removing the starter inspecting for rust or  dirt buildup on the starter shaft or drive parts and cleaning and lubricating you may cure the problem.

Eric