BAC Forum
General Boards => Technical Support => Topic started by: Mike Humble on March 21, 2019, 05:30:23 PM
-
My galley ceiling lights stopped working. Located blown fuse and replaced. Immediately blew again. All other functions on the multiplex panel work ok. Where do I start. Nothing has been done in this area recently.
Mike
-
Mike,
Sounds like you have a short between the multiplex unit and the lights. I'd start with a look at the lights themselves, but before you pull the fixtures, try removing the bulbs. You may have a hard short in one of the bulbs. If no joy, then remove the fixtures and check for a short at the connection(s).
Steve
-
All fixed. Found a fried LED