BAC Forum
General Boards => Technical Support => Topic started by: Bryan Beamon on August 03, 2020, 08:37:15 PM
-
attached picture shows door seperateing and I was considering using JB Weld to reattach the panel. Any other reccommendations on the repair?
-
Bryan
There is a special panel bonding epoxy for the job if can be picked up at any automotive body supply house how ever it requires a special caulking gun to apply it and the panel joint has to be clean preferably to bear metal.
Eric
-
Eric, Is that the two part 3M panel bond that takes the $50 gun to apply? This stuff will stick most anything together if applied correctly to a real clean surface.