BAC Forum

General Boards => General Discussion => Topic started by: Rocky Healey on August 04, 2022, 07:19:14 AM

Title: Door inside vinyl cover for 08 PT
Post by: Rocky Healey on August 04, 2022, 07:19:14 AM

The inside cover to my door has shrunk in both height and width, has anyone had the same problem and if so how did you fix it or is replacement the only solution, and if so where might I find one?  Thanks in advance for any advise/help.

Rocky Healey
08 PT 45footer
C-13 power

Title: Re: Door inside vinyl cover for 08 PT
Post by: Fred Brooks on August 04, 2022, 05:22:32 PM

    Rocky,
Is the entry door inside panel wrapped in vinyl or is the panel vacuum formed plastic? If it is wrapped, you can remove the panel from the door carefully. You will have remove the window trim and everything that is securing the panel. Using a hair dryer, you can warm the vinyl and restretch it around the edges and secure it with 3M-08090 spray adhesive. If you have a hand stapler, add 1/4" by 1/2" wide staples around the perimeter for extra strength. It is about a 4 hour adventure. Fred

Title: Re: Door inside vinyl cover for 08 PT
Post by: Rocky Healey on August 04, 2022, 07:28:21 PM

Thanks Fred,
Mine is vinyl so I guess it will be an ADVENTURE.  I will let you know how it goes.

Rocky Healey
08 PT 45
C-13