1
Technical Support / Re: 1998 Patriot dash gauges dead
« Last post by Dennis Clevenger on Today at 02:45:56 AM »Thanks Steve, I did check tightness of all S, I and Grd nuts but am now thinking of loosening, move the ring connection a bit and re-tighten.
Dennis
Dennis
Dennis,
In addition to Eric's advice, (assuming the dash meter connections are held in place with threaded nuts) be sure to check the tightness of each nut. I had a similar problem on my 01 and found most of the nuts were not tight, causing intermittent connections.
Steve