BAC Forum

General Boards => Technical Support => Topic started by: Kevin Heusinger on October 29, 2020, 09:22:39 PM

Title: 2009 beaver contessa milan instrument failure
Post by: Kevin Heusinger on October 29, 2020, 09:22:39 PM

I've got a 2009 contessa milan. I've lost all dash instruments. Dash lights working. I'm getting " no data " display on the medallion screen. Any thoughts? Thanx.......Kevin

Title: Re: 2009 beaver contessa milan instrument failure
Post by: Joel Ashley on October 30, 2020, 12:11:07 AM

It would be easy for me to blame the ignition solenoid in the electrical bay (streetside forewardmost) right away, but others here are more versed in such things, specifically your particular dash.  It would be useful to know if anything else is not working;  it would help zero in on the culprit.  Driving lights, windshield wipers, overhead fans, dash A/C... they are on the ignitioned side of the solenoid like the instrument panel is;  are they working?  The dash lights are probably on the same circuit as the headlights, which are on the "hot" side of the solenoid and don't depend on the ignition, so I assume the headlights work?

Joel

Title: Re: 2009 beaver contessa milan instrument failure
Post by: Bryan Beamon on October 30, 2020, 04:02:18 PM

Kevin, the speedometer controls the other Medallion instruments. Try removing the electrical connector to reboot your connection. Monaco shared this fix we me several years ago. The picture below shows the connector.