BAC Forum

General Boards => Technical Support => Topic started by: Mark Bodenhamer on April 19, 2021, 04:47:18 PM

Title: Water pump question
Post by: Mark Bodenhamer on April 19, 2021, 04:47:18 PM

Up until yesterday when connected to city water we were able to flip the switch for the pump and use water in the tank. It won’t do it now, but will work when the city water is disconnected. What happened?

Title: Re: Water pump question
Post by: Bill Lampkin on April 19, 2021, 05:25:27 PM

Is your fresh water tank empty?

Title: Re: Water pump question
Post by: Mark Bodenhamer on April 19, 2021, 08:43:31 PM

No, it’s full.

Title: Re: Water pump question
Post by: Lee Welbanks on April 19, 2021, 09:19:49 PM

Sounds like the city water pressure is above what the pump is set at so it will not come on. If you shut off the city water will the pump work?

Title: Re: Water pump question
Post by: Mark Bodenhamer on April 19, 2021, 09:54:26 PM

That’s it. I didn’t know it was a thing. Thanks Lee!