BAC Forum

General Boards => Technical Support => Topic started by: Malachi King on May 31, 2021, 02:00:16 AM

Title: 1996 Beaver Savannah Service Bay Identification
Post by: Malachi King on May 31, 2021, 02:00:16 AM

Hello,

I just bought a 1996 Beaver. I need some help identifying all the filters in the service bay. Starting from left to right. Is the first one the hydraulic fluid filter? Is the second one the primary fuel filter? Is the third one the water separator filter? Is the last one the secondary fuel filter? My next action will be locating the serial number on the motor, so I can go to the local Cat dealer and get all Cat replacement filters.

Thanks for any help you have to offer!

Title: Re: 1996 Beaver Savannah Service Bay Identification
Post by: Eric Maclean Co-Admin on May 31, 2021, 02:23:49 AM

Malachi
Your right on
Left is hydralic filter the next one is the fuel filter the next one is the Raycor/ Winn fuel seporator and the clear one is the prescreen for the fuel seporator.

In the coach assist section technical library there are manuals for the Raycor fuel seporator so you can become familiar with it

Filter #s are as follows
Hydralic filter =                Wix 51551
Fuel filter.      =.                Wix  33626.  Or  CAT #. 1R0751
Fuel seporator=.              Raycor #53230R
Sight glass prescreen.    Raycor #300200
Engine air filter.               Wix  46857
Engine oil filter.               Wix 51791  or CAT1R0739


Hope this helps
Eric

Title: Re: 1996 Beaver Savannah Service Bay Identification
Post by: Malachi King on May 31, 2021, 06:40:30 AM

Eric,

You bet that helps! Thanks so much!