BAC Forum

General Boards => Technical Support => Topic started by: Clive Hiscock on July 29, 2011, 07:47:09 PM

Title: Microwave support
Post by: Clive Hiscock on July 29, 2011, 07:47:09 PM

Has anyone replaced the Sharp microwave / convection model R1850 with an smaller and or lighter unit. The Sharp convection microwave is a very heavy unit and the mounting points at the front of the unit which bolt into the cabinet are stretching the mounting panels on the top of the microwave. Also there are some cracked plastic panels that I cannot find replacements for.

Any guidance would be appreciated.

Title: Re: Microwave support
Post by: Richard And Babs Ames on July 29, 2011, 08:14:03 PM

What is your location? If you are close to someplace like RV Outfitters that advertize here or Classic Coach Works in Lakeland, FL that specializes in remobels of motorhomes. These remodelers are scattered accross the country.

Title: Re: Microwave support
Post by: Clive Hiscock on July 29, 2011, 09:15:12 PM

I am located in Lake Worth, Fl. I can do the work my self (I think :o), was looking to see if someone else had selected a better unit, like GE profile or Viking etc, also if they had any problems fitting. But I may resort to a RV outfitter type place in the end..

Title: Re: Microwave support
Post by: Glenn Perkins on August 01, 2011, 06:53:13 PM

Clive,

I replaced the Sharp in our 99 Marquis, about 9 years ago, with a GE Advantium (110v) myself, and have had no problems with it jarring loose at all, over the past 130K miles.

Glenn