BAC Forum

General Boards => Technical Support => Topic started by: LaMonte Monnell on August 18, 2021, 05:36:24 PM

Title: Aqua Hot issue
Post by: LaMonte Monnell on August 18, 2021, 05:36:24 PM

My Aqua Hot has a red led light on circulation pump # 1. Does this have anything to do with the hot water for showers, or is this for the heat exchanger heat?

Title: Re: Aqua Hot issue
Post by: Steve Huber on August 18, 2021, 07:05:26 PM

Lamonte,
Pump 1 feeds zones 1 & 5. I'm not sure what is serviced by those zones. My guess is that z1 is for heating the salon and kitchen and 5 may be for the water bay. You may need to simply try the shower and see if you get hot water. Sometimes you can get the pump running by tapping on it.
Steve

Title: Re: Aqua Hot issue
Post by: Keith Moffett Co-Admin on August 21, 2021, 10:04:33 PM

LaMonte
The output from the pump goes up to a brass check valve which also sticks sometimes.  Give that a tap or two as well. 

Title: Re: Aqua Hot issue
Post by: LaMonte Monnell on March 29, 2022, 10:40:52 PM

thanks