BAC Forum
General Boards => Technical Support => Topic started by: Paul Bedoe on October 23, 2021, 07:26:34 PM
-
Had a cable go and ruined my 5 agm 200ah batteries. So switched them out with lithium. In for a penny in for a pound have a little down time so I also upgraded my 2000 w zantrax to a 3000 w pure sign wave. I was going to use my same wire for the keypad but I with the bus adapters I could not get the damn thing to work… however I hated the location above the entry door so I ran a cat 5 to the bathroom and a much better location now I can take a crap and adjust the settings 🤣
-
I just replaced my inverter and used the little adapter thingys on both ends of the Xanbus; worked first time.
-
My old keypad worked fine I don’t know why the adapters did not work ? I put the right colors on the ends. With the cat 5 both my new keypad and ags link up and work fine …
-
Paul -
Certainly, as we get older, we look for more multi-tasking methods to get more jobs accomplished quicker and easier... whether in the bathroom or elsewhere. I must say I appreciate your humor; you had me chuckling. Regarding the location of the Xantrex remote, I like its location being above the co-pilot's seat because I can check the inverter's charging voltage, and on the Aladdin at the same time with a turn of my head, I can see both the house batteries' and chassis batteries' charge status.
-
It seemed every time I checked it my step was in and I reached and looked up for me it was awkward and inconvenient. …..
-
Oh, thank g. We can use the “C” word on the Forum. Yay! 😁
🤭Joel