BAC Forum

General Boards => Technical Support => Topic started by: Randy Keaveny on August 24, 2022, 11:49:23 PM

Title: Grounds 98 Beaver motorhome
Post by: Randy Keaveny on August 24, 2022, 11:49:23 PM
just a shot in the dark here...is there 1 common place for grounds on the beaver motorhome?  specifically the indicator readings for tank levels???   propane and power input...that is above the entry door   passenger side....

additionally   anyone know the size of the water lines  specifically  what size plug i would buy to plug lines that are leaking?  i found the pump outlet size is 1/2 inch....would i need a 1/2 male end to plug the female side??



thx
Title: Re: Grounds 98 Beaver motorhome
Post by: Carl Boger on August 24, 2022, 11:56:44 PM
There are grounds that connect to the frame, and a lot of grounds that go the the buss bar in the electrical panel.  Tracing wires can be a chore, and it is often easier to add a additional ground to either test or fix a issue. 

1/2 inch pex fittings will fit in the water lines.

Hopefully this will help you out some, I know its not much.