BAC Forum

General Boards => Technical Support => Topic started by: George Frudakis on August 13, 2023, 06:21:32 PM

Title: kitchen cabinets draws
Post by: George Frudakis on August 13, 2023, 06:21:32 PM

I have 2002 Marquis and cheery wood cabinets. Have an ice maker and want to remove and replace it with a drawer or one big cabinet door. Where can I find the parts?

Title: Re: kitchen cabinets draws
Post by: Carl Boger on August 13, 2023, 11:19:05 PM

George,

A good cabinet shop should be able to match a new cabinet to your old ones. The stain will be the tough part, but they can do a pretty good job especially if you have a small trim piece that they can match it to.

Title: Re: kitchen cabinets draws
Post by: Bill Lampkin on August 14, 2023, 12:57:50 AM

I had to add a trim piece above our new refrigerator. I fretted about the stain until I found some cherry boards at home Depot. Tested the finish using urethane,one coat and the color was
 spot on

Title: Re: kitchen cabinets draws
Post by: Steve Huber on August 14, 2023, 02:04:18 AM

George,
Bill's advice is spot on. Most Beaver cabinets in cherry will match unstained cherry with polyurethane. If you decide to use stain, use ZAR. Don't waste your time with Minwax as  I've found it not to be a true cherry color. Ace often has ZAR.
Steve