BAC Forum

General Boards => Technical Support => Topic started by: Steve Huber on June 28, 2024, 01:13:35 AM

Title: Programming a Voyager AOM 7694
Post by: Steve Huber on June 28, 2024, 01:13:35 AM

The Voyager video monitor in our 07 Contessa has worked flawlessly for years. After having in the shop for an engine check I noticed that the rear camera does not select when reverse is selected on the tranny panel. The rear camera works and can be selected manually (Channel 1)with no problem. For some reason shifting to reverse selects Channel4m which has no camera connected. Turn signal cameras work fine.
I've got the manual but it's no help. Does anyone know how to change the reverse selection camera?
Thx, Steve

Title: Re: Programming a Voyager AOM 7694
Post by: Scott Shearer on June 28, 2024, 06:35:29 PM

Steve,

You may have already seen these, but here are a couple Google search phases that might be of interest.

“Voyager AOM 7694 troubleshooting”
“Replaced a Voyager display and Aladdin does not
Work”

-Scott

Title: Re: Programming a Voyager AOM 7694
Post by: Steve Huber on June 28, 2024, 11:14:10 PM

Thx Scott, but no joy...
Steve