BAC Forum

General Boards => Technical Support => Topic started by: Mark Hoovler on September 01, 2024, 05:25:14 PM

Title: Hydro hot issue
Post by: Mark Hoovler on September 01, 2024, 05:25:14 PM

Hydro hot was not running well. 
I was performing the service and pulled the burner out and found the mounting bracket had a crack in it.  Now it is broken.  Is it better to rebuild the burner or is it recommended to replace the burner assembly?  Assuming the parts are still available. 
Thanks for any help

Mark

Title: Re: Hydro hot issue
Post by: Joel Ashley on September 01, 2024, 09:56:40 PM

Check on John Carillo’s site.  But a local machine shop may be able to repair the bracket or make a new one.

https://www.heatmyrv.com/product/bracket-control-unit-webasto-dbw-2010-300-wpx-362-107/

Joel

Title: Re: Hydro hot issue
Post by: Mark Hoovler on September 02, 2024, 03:15:52 PM

Thanks Joel I think we found the parts on his sight

Mark