BAC Forum

General Boards => Technical Support => Topic started by: Mike Gineris on February 26, 2025, 08:23:41 PM

Title: Replacement Fuses?
Post by: Mike Gineris on February 26, 2025, 08:23:41 PM

Where do I find replacement fuses?  These things are weird.  Electrical bay under driver.  Box looking things completing the terminal block.

Title: Re: Replacement Fuses?
Post by: Bill Lampkin on February 26, 2025, 09:00:40 PM

I see relays, not fuses

Title: Re: Replacement Fuses?
Post by: Mike Gineris on February 26, 2025, 09:11:17 PM

Those are fuses (black rectangles) in the Vertical Terminal Block looking thing.  Yes I know which ones are relays.  Am I wrong?

Title: Re: Replacement Fuses?
Post by: Eric Maclean Co-Admin on February 26, 2025, 09:30:20 PM

Mike
 those are Cole Hersee thermal  circuit breakers when over loaded they should interrupt the circuit until they cool down and automatically reset if the circuit is constantly over loaded or there is a short they will continue to cycle with an audible click it is possible to have a bad one now and then however that doesn't reset itself .
You should be able find replacements through NAPA .
You have to match the amperage rating for each circuit just as you would a fuse .

https://www.amazon.com/HERSEE-CIRCUIT-PROTECTION-20AMP-BREAKER-NEW-30056-20/dp/B073RRKD2K?gQT=2

Hope this helps
Eric

Title: Re: Replacement Fuses?
Post by: Mike Gineris on February 26, 2025, 09:34:36 PM

Like a home circuit breaker that resets itself.  Perfect.  Thanks!