BAC Forum
General Boards => Sources for Suppliers, Parts and Maintenance Materials => Topic started by: John Demartini on July 20, 2025, 10:34:47 PM
-
Good Afternoon:
I'm looking for front rotors, currently have "Walther EMC 00150 REV A" stamped on front rotors. Not much luck on these, except eBay.
Any part numbers, or suggestion would be greatly appreciated.
Thank you,
John Demartini
-
John
Is your coach air over hydraulic disc brakes with Bendix hydraulic calipers or straight air disc brakes with the Meritor ABD caliper's ?
Eric
-
Eric. Air over hydraulic with bendix calipers.
-
John
This link to BAC should give you the numbers you need.
You'll have to read through it to get to my post with the part numbers .
Note that most of the parts on the Magnum chassis where supplied by Dayton Walther back in the day but are all still available through other manufacturers
It's also of note that a lot of these parts are common to the older Ford 700 series trucks as well as international school busses .
They are medium duty truck parts.
I forgot to ask if your coach has ABS brakes or not.
In the list on that BAC at the bottom link the rotors are for a non ABS system meaning they will lack the tone ring for the ABS sensor however any good parts man should have no problem getting what you need
https://www.amazon.com/Centric-Parts-120-79023-Premium-Coating/dp/B001NY4QSY
https://www.fleetpride.com/parts/centric-parts-disc-brake-rotor-12079023?srsltid=AfmBOoqEI9eFC_zt144cMAjtvAuHGVU6zBMLx2MPNPjDmA3mPB7_VdCv on
https://beaveramb.org/forum/index.php/topic,11378.msg80310.html#msg80310
Hope this helps
Eric
-
John,
See attached. This info should be in Coach Assist in the Brake System section. Hope it helps.
Steve
-
Thank you both Eric and Steve. This information helps me out as always.
-
John,
Still need a pair of rotors, I have a new pair for sale. Contact me.