BAC RV Club Forum
General Boards => Technical Support => Topic started by: Michael Hammer on March 06, 2026, 01:49:54 AM
-
Hello. I have a 2008 Beaver Marquis. I was hoping someone would know the location of the Eaton Vorad EVT 300 CPU. I believe it has failed and would also like to knwo if anyone has a suggestion on replacement or repair. Thank you
-
On my 07’ Marquis, it is located inside the left side switch cluster just to the left of the pilot seat. As of know, there are none available. Rick Youngblood was the go to, but last I heard, all of his stock is gone. I have replaced mine twice, so knock on wood, it keeps working. You can get the Cruise Control to work if you cycle the on/off switch 3 times, but the Collision Avoidance System will not work. Not the news you wanted to hear, but at least the CC will still operate. Good luck!
-
Hi Frank. Thanks for the prompt reply. I did send Rick an email earlier hoping he could help. Haven't heard anything yet. I thought I looked thoroughly for the cpu where it should be but I didn't see it. I'll look again tomorrow morning. Beaver coach sales, Mike thought it was located elsewhere but couldn't remember where. I see numerous units on ebay but assume they would need specific re-programming. That might kill the project. Did you need to reprogram your 2 units? Any other thoughts would be appreciated. Take care. Mike