BAC Forum

General Boards => Technical Support => Topic started by: Ray Kaminsky on June 13, 2012, 07:30:15 PM

Title: 2007 Contessa No Patio Awning Power
Post by: Ray Kaminsky on June 13, 2012, 07:30:15 PM

Our patio awning switches are not receiving power.  Previously worked fine for years.  Our wiring diagram for the awinig has this description for a 10 amp fuse - 14GA RED POWER - HOUSE DC DIST, CRT 8, 10A (CAMELOT, SCEPPTER, CONTESSA).  Does anyone know the location of this fuse?

 I have checked all fuses in the bathroom panels and all are ok.  I have checked the diagram for the master board outside under the drivers seat - and nothing on the diagram appears to reference the awning.  We also removed the wood panel cover under the passenger side armrest where the switch and control box are supposed located and did not find fuse.

Title: Re: 2007 Contessa No Patio Awning Power
Post by: Mike Humble on June 14, 2012, 12:01:25 AM

There are some fuses located in right rear door rear of batteries.  There are some fuses behind the grey door.  Don't know if it is there or not, but another place to look.
Mike

Title: Re: 2007 Contessa No Patio Awning Power
Post by: Don and Kathy DuCharme on June 14, 2012, 01:35:05 AM

Ray, on our 07 Contessa the patio awning fuse is a 10A fuse located in the bathroom panel behind the black cover labeled "more fuses".  It is the second one down on the right side.  The label on the inside of the cover indicates that this fuse controls the sat TV, tv power boost, etc..  No mention of the patio awning.  Hope yours is the same.