BAC Forum

General Boards => Technical Support => Topic started by: Fred Nikirk on June 18, 2012, 08:11:41 PM

Title: Hydro-Hot
Post by: Fred Nikirk on June 18, 2012, 08:11:41 PM

I have a 2001 PT with a Hydro Hot that quit this morning.                                          
Im getting a diesel burner status light a stir pump light a electric element light.  No hot water and
when I turn up my furnaces, no circulation pump light and no furnace fan.  I have plenty of diesel, new filter.  Any ideas?

Fred

Title: Re: Hydro-Hot
Post by: Joel Ashley on June 18, 2012, 11:39:33 PM

Sometimes when mine quits for whatever reason, simply turning off the diesel switch on the panel inside the coach, and then back on a few seconds later will reboot the system.  Did you try that as a first check?

The exchanger fans and circulation pump may not run until the fluid is heated, and the burner and electric element may fire up again once you try a reset.

Joel

Title: Re: Hydro-Hot
Post by: Orman Claxton on June 19, 2012, 04:51:15 AM

Fred
Give me a call, I try walk you through some trouble shooting Thanks
Orman

Title: Re: Hydro-Hot
Post by: Fred Nikirk on June 19, 2012, 12:55:33 PM

I shut it off for a couple of hours, and wa-la it healed itself. Thanks for the help.
Fred

Title: Re: Hydro-Hot
Post by: Orman Claxton on June 19, 2012, 08:00:19 PM

TEMPORARILY!
Problem will likely repear.
Orman

Title: Re: Hydro-Hot
Post by: Joel Ashley on June 29, 2012, 07:32:51 AM

Fred, Orman's right.  If you haven't already, give him a call so he can help head off any further issues at less convenient times.

Joel