BAC Forum
		General Boards => Technical Support => Topic started by: Brad Burgess on July 21, 2012, 06:15:39 PM
		
			
			- 
				Hello All
 
 Just came back from a short trip with no propane to the cooktop.  I have a rotary switch at the fill port location which apparently turns on and off a supply valve - the indicator light for this switch does not illuminate no matter what position the switch is in.  Where do I start to look?
 
 Thanks,
 
 Brad Burgess
- 
				Brad
 
 We had a similar problem but it turned out to be a burned out light bulb. I would check the supply valve by listening to it cycle on and off, It should make a clinking sound when opening and closing. Next I would check the power supply with a test light.
- 
				On some coaches if not all the propane detector inside the coach has the ability to shut off the supply from the tank.  It is a good place to check.   
 
 Steve