BAC Forum
General Boards => Technical Support => Topic started by: Dick Simonis on September 05, 2012, 03:46:55 PM
-
Yesterday when we went from Idaho Falls to Anaconda, MT our Beaver found some bugs that must have been the size of Humming Birds based on the resounding impact they made on the windshield and front cap. When we got to the RV Park there was quite a mess on the front and cleaning was a nightmare.
My question is: What products work well with MH's of the 2000 vintage that have the factory clear bra. I have no idea what product Beaver used during that production period but I do believe it's a porous material and many of the bug removers state not to be used on porous surfaces.
My, whatever it is, is in good shape and I'd like to keep it that way.
Any thoughts would be appreciated.
-
I use Meguiars car wash on our Beaver. Our coach has a plain front but I find the Meguiars is really sudsy and slippery and really gets into the dirt/bug stuff.
We're heading to the Bozeman, Mt area Thurs. Hope those bird size bugs weren't on the I-90 route to Anaconda!
-
I find that repeatedly soaking the bugs with water or water and soap to soften them enough to come off relatively easily using one of those sponges with the mesh over it. Rinse the nose and bugs 4 or 5 times over a 10-15 minute period before you start the soap and water clean. I am not completely sure but I think something like 303 protectant would be good to protect the clear plastic overlay that has been used on the nose of some Beaver coaches. It stops sun UV damage and many of these clear non painted coverings seem to crack with age. You could check with the supplier of the clear films what they recommend.
Later Ed
-
Dryer sheets are a bit quicker than the repeated wetting method. The soffner in the sheets soffens the bugs and the sheets rub the bugs off. It does take some rinsing.
-
I use Dawn liquid dish soap on the massive Love bugs we get down in this part of the country. Just a long squirt in 3 gallons of water works great. Best thing I have ever used to get them off.
-
I have to agree with one of the previous posts, Bounce dryer sheets are by far the best way to remove bugs
-
I've adapted my outdoor shower so that I can attach a standard water hose. To the end of the hose I attach a long handle car wash brush. With hot water flowing, the worst of the bugs come off quickly.
-
Thanks for the replies I'll give a couple of those a try. Regarding the Bounce, were you using them on a clear bra or just a painted surfaces?
The hot water is a good thought, I do have a hose bib on the HW heater that would accomplish 2 objective...flush the HW heater, and remove bug residue.
-
Hi DIck, I use the Bounce sheets on everything: paint, clear bra, glass.
Dave
-
A product called Bugs B Gone found at some auto parts stores (just bought a concentrate at Lordco in Canada) works great for me. To help out I regularly apply a protective quick wax from Thetford that just wipes on with minimal elbow grease. Cleaning with 20/20 windshield wash and the Bugs B Gone and rinsing and drying well first is necessary.
I tried Aerospace 303 once this summer, but the bugs didn't clean off as easily the next time as they did with the Thetford product on the surface. The 303 is best for UV protection, but doesn't seem as slick.
I'm not sure I'd use very hot water; it conceivably would soften and remove any protective wax you've put on, plus it might soften the film enough that scrubbing could then leave micro scratches. Such scratches give the next batch of bugs a better grip, making them that much harder to remove.
Joel
Currently entertaining similar Montana bugs at Jim and Mary's RV, Missoula ;)
-
Thanks for the suggestions. I checked with Pat and she does have some Bounce and I'll give that a try after our return trip to Idaho Fall Saturday. As far as Bug removal products go, I did pick up a Turtle Wax product but it states not to be used on porous surfaces so I'm a bit leery although I did use it before reading the label......no obvious ill affects so far.
Joel, hope you[re enjoying Missoula and if time permits you should try to pop up to Polson for a bit of sightseeing and perhaps some fishing. Beautiful location.
One more round of Golf at Old Works than back through the smoke heading south....perhaps the bugs have been asphyxicated.
-
An old trick is to spray Pam on the painted surfaces befor you get into the bugs. Then wash with dawn, comes right off.