BAC Forum

General Boards => Technical Support => Topic started by: Keith Moffett Co-Admin on May 04, 2013, 01:08:51 AM

Title: Brake pads
Post by: Keith Moffett Co-Admin on May 04, 2013, 01:08:51 AM

I just had the MH into a shop to get the caliper rails (slides) lubed.  While the front tires were off they inspected the rotors and pads.  The front pads are still over 50% but are flaking and one side has a small portion missing on one end.

I need a supplier for replacements and any suggestions.

Thanks much
Keith

Title: Re: Brake pads
Post by: Joel Weiss on May 04, 2013, 04:17:24 PM

On my MH I know the previous owner had obtained both pads and rebuilt calipers from NAPA.  If you need the part numbers I can try to find the old receipt.

Title: Re: Brake pads
Post by: Roland DuBree on May 04, 2013, 05:03:44 PM

Call Beaver (Navistar) parts  at 677-466-6226 give them your vin number and the can tell you part number for pad, caliper, etc. Just got all  my number last week.

Title: Re: Brake pads
Post by: Keith Moffett Co-Admin on May 05, 2013, 10:59:16 AM

Roland
I had called BCS parts before posting here but called at a bad time so got no answer.  I did call and talk to Ty today and he said they stock pads etc. for most of our rigs.

Will update on Monday to confirm this so we can all breathe easier.

Keith