BAC Forum
General Boards => Technical Support => Topic started by: Ron Johnson on June 08, 2013, 07:35:37 PM
-
I stuck a plugin circuit tester into the plug in front of the kitchen sink ... it lit up .. I stupidly pressed the button on the tester [not having a clue what it did] and npw some of the driver\kitchen side GFIs are out. Some means the stove igniters, the 2 front kitchen counter plugs, the plug at the front of the kitchen counter, the plug in the kitchen counter garage, When the circuit snapped ff I distinctly heard it right behind the plug but I cannot see a pushin GFI button there so ..... I continue the search. Any help would be appreciated.
-
Try resetting the GFI in the main storage bay. I know you heard something from the area by the plug but if that is not a GFI that could not be what you heard. Beyond that there are three breakers in a grey box on the ceiling of the storage bay, flip those off and back on again.
Later Ed
-
There also may be an outlet under the sink inside the base cabinet, as well as an outlet under the overhead cabinet above the kitchen sink and counter.
-
Thanks everyone .. our telephone was plugged into the outlet at the driver's end of the kitchen counter the large plugend hiding the red button which reset everything. Never had to do that before so .. now I know.
-
Glad to hear your running again, we have GFI breakers and need to reset in the 120 breaker box(06 Thunder)
-
I looked at an 2005 electrical panel a couple weeks ago and had a little envy but so far this system has worked great, especially since I went to AGM batteries and a Magnum pure sinewave inverter with 4-stage charger. Nice to have the kitchen back in working order.