BAC Forum
General Boards => General Discussion => Topic started by: Michael Marcocchio on June 09, 2013, 01:06:30 AM
-
Hello for any of you are have filling your water tank problems and adding purifer liquid I have the fix I bought from Beaver sales a threaded seal plug like the ones in the service bay for putting your water hose though I drilled a 2 inch hole ( with a 2 inch hole saw ) glued the plug in the hole I drilled about 2 inch from the top of my tank right at the 100 gallon mark.now take me about 15 mins to add 100 gallons of water be4 took couple hrs now I can also add purifer though the same hole I have pictures if anybody is interested.
-
Hi Michael, it sounds like your on top of the problem thanks for sharing you issue, we have an 06 Thunder and this model has a very nice fill about 1.25" in size that allows us to fill from the top of the tank this was a great improvement. We also have the auto fill but the rig is the same as yours in this respected it would take hours to fill if empty.
I know a lot of Beavers had added a modified fill port. You might want to take a photo and post it!!
-
Hello I took pictures but dont know how to post them
-
Michael,
This set of directions is a sticky post on the General Discussion section of the Forum:
http://beaveramb.org/PDF/Compressing-Resizing%20Pictures%20V15.pdf
It may help you resize and post your pictures to the Forum.
Larry