BAC Forum

General Boards => Technical Support => Topic started by: Larry and Heidi Lee on July 22, 2013, 11:53:50 PM

Title: How to "Stretch" your carpet. Anyone?
Post by: Larry and Heidi Lee on July 22, 2013, 11:53:50 PM

I noticed the carpet in the bedroom has a slightly raised section where it is getting a little loose and looks like it needs to be re-stretched. However I don't  feel any tack strips along the wall so unless I am missing them I am wondering how to tighten up the carpet? Anyone have this issue and resolved it themselves? Certainly one of the better problems to have!  ::)

Title: Re: How to "Stretch" your carpet. Anyone?
Post by: Jim Nichols on July 23, 2013, 12:24:16 AM

On the slide out panels it is glued. May just be that way on the floor.  On the bedroom street slide I had to pull the trim and carpet to install rollers in the bedroom.

Title: Re: How to "Stretch" your carpet. Anyone?
Post by: Steve Huber on July 23, 2013, 03:14:10 AM

My 01 Contessa had tack strips for the floor in the salon area. Assume bedroom would be the same.
Steve