BAC Forum

General Boards => Technical Support => Topic started by: Adam Hicklin on September 15, 2013, 07:42:22 AM

Title: Headlight switch
Post by: Adam Hicklin on September 15, 2013, 07:42:22 AM

I pulled the headlight switch to turn on the headlights and the knob with attached shaft came all the way out!  I put it back in and was able to apply some side tension to pull it out and get the lights on, but this is a problem.  Question is, can this be fixed, or do I need to replace the whole switch?  While I'm at it I may as well replace the hi beam/lo beam floor switch because every time I step on it, all the lights go out!  Once I get the switches working, I'll do the headlight fix.  

Any words of wisdom?

Title: Re: Headlight switch
Post by: Tom and Pam Brown on September 15, 2013, 01:48:08 PM

Take the old one out and take it to an automotive parts store for the to match.

Dimmer switch should be easier.

Title: Re: Headlight switch
Post by: Steve Huber on September 15, 2013, 03:42:34 PM

I think it is a GM switch. If the shaft keeps coming out, the switch needs replacement.
Steve