BAC Forum
General Boards => Technical Support => Topic started by: Tom Rogers on February 26, 2010, 02:06:11 PM
-
Our 06 Monterey's (pipcock or pitcock ... whatever it's called) under the plastic see-thru bowl keeps dripping. I've finger tightened the black knob as tight as it will go. Before I loosen it I'd like to know what I'll be looking for as far as a washer, gasket or seal. I've never changed a filter myself so don't know what to expect. The drip frequency is about one per half hour. It doesn't seem to be coming from where the filter secures on to the bowl ... seems to be coming from around the knob area. Is that the drain for removing collective water from the bottom of the bowl? I don't want to loosen then have the bowl empty out on me. Thanks.
-
It's called a "petcock". Try placing a small can or bowl under the petcock and open it to let it flow for a second or two and then close it. There might be a piece or crud lodged inside causing it to drip. If that fails take it to a shop that works on diesel trucks, they will know how to correct the problem. Marty
-
The fuel filter was leaking on my o0 Monterey was leaking also, and I discovered that the plastic bowl on the Racor filter was cracked and leaking. The total cost for a new filter, R90T, and bowl was about $50.00. Louis
-
05 Monterey C9 400 Monterey- Our drain bowl assembly is seeping fuel too. I have tried the above recommendations and changed the filter as well with the same result, a slow leak. With no local CAT dealer I am hoping somebody might have a part number so I can attempt to order the bowl assembly on-line? I can post pictures if necessary..
-
A picture probably would help. Usually the filter/water seperator is an after market product like "Racor". Thats what mine has on it. If you could take a picture and post it here someone may be able to point you in the right direction. Marty
-
Hi Marty, here is what I have... I am hoping this is a standard part that Monaco used for my 05 Beaver Monterey Bayview 4 34' C9 400 model and somebody can provide a part number for the fuel cup / drain. I didnt find a part number on the cup. :)
-
The bowl is a standard Racor part for that family of filters. Take your filter number to a Racor dealer and they can match it to the correct bowl. If not close to a Racor dealer any good parts store that caters to larger vehicles should be ablt to get one.
-
Thats a good idea. Thanks Richard!
-
That looks like the bowl of a Racor 300 series. As above said or take it to a Kenworth,Peterbuilt or a Freightshaker dealership. If they don't have it they will know where to get it. Marty
-
http://www.maesco.com/products/racor/r_spn_intro/r_spn_intro.html
The above company specializes in Racor filters and water seperation products. Very helpful.