BAC Forum

General Boards => Technical Support => Topic started by: Darrell Terry on August 29, 2014, 10:03:54 PM

Title: Flexsteel passenger seat Inop.
Post by: Darrell Terry on August 29, 2014, 10:03:54 PM

2004 Monterey / Laguna with 8 way power seat at passenger side.
Took a short trip today and when I arrived my passenger seat was completely inop.
It worked fine prior to trip but I have no power to seat now.
Driver seat works and all other 12 volt systems work fine.
I check 12 volt fuses at back cabinet above W/D but all were OK.
Wires coming out of floor to seat seem OK.
Any help appreciated.

Darrell Terry

Title: Re: Flexsteel passenger seat Inop.
Post by: Paul Schwalen on August 29, 2014, 10:32:28 PM

Darrell,

When that happens to our pilots chair it is always the connection where the wires come out of the floor and then connect to the wires from the chair.  I just push the male/female plugs together and all is fine again.

Hope this helps.

Paul

Title: Re: Flexsteel passenger seat Inop.
Post by: Darrell Terry on August 30, 2014, 03:19:24 PM

Paul.
 Thank you, that was the problem. We had carpets replaced last summer and apparently the installer did not
connect one of the wires securely. Thank you again for your timely response.
Darrell
2004 Monterey