BAC Forum

General Boards => Technical Support => Topic started by: Tom and Pam Brown on April 20, 2010, 04:48:55 PM

Title: Close out air leak
Post by: Tom and Pam Brown on April 20, 2010, 04:48:55 PM

My 1999 Beaver Marquis had a air leak when the closeout (step cover) is in the open position.  Has anyone ever tried to fix the air lines that are inside the little box where the closeout stores.  I wonder how you would get to the cylinder to tighten or reseal the lines.

Thanks

Title: Re: Close out air leak
Post by: LarryNCarolynShirk on April 20, 2010, 11:13:20 PM

It seems years ago on my 98 Patriot the tech took out the stops on each guide to extend the close-out slide.  Then he could unhook the cylinder from below the front edge of the close-out and pull it out to reach the end where the hose is attached.  That is from my foggy 11 year old memory.  Good luck.

Larry