BAC Forum

General Boards => Technical Support => Topic started by: Jim Shaw on May 25, 2010, 05:50:46 PM

Title: Speedometer
Post by: Jim Shaw on May 25, 2010, 05:50:46 PM

Does anyone know where I can get a copy of the dip switch position for my speedometer and what information is needed for this.
Jim Shaw
2003 Monterey
ISC 350
Coach 800475

Title: Re: Speedometer
Post by: George Harwell on May 27, 2010, 01:39:42 PM

Jim, since I have coach number 800495 I would guess the speedometer is the same in both coaches. I have an 03 Monterey with 350 Cummins. I found the website for BEEDE ELECTRICAL INSTRUMENT CO. and the dip switches are set by the number of teeth on the flywheel and number of cylinder in the engine. Since we don't know the number of teeth on the flywheel I will pull my speedometer and give you the reading on the dip positions. Still having coffee so you will have to wait a couple of hours for the results.

Title: Re: Speedometer
Post by: Jim Shaw on May 27, 2010, 03:37:37 PM

Thanks George, enjoy your coffee, I am having mine also.
Jim

Title: Re: Speedometer
Post by: George Harwell on May 27, 2010, 04:01:14 PM

 Jim, here we go. As you stated it has 12 rockers and here are the settings on mine. The bottom of the switch is "OPEN" so rockers 2,6,7,& 8 are selected open, all the others selected closed. Try that to see if it fixes the problem. Cheers!

Title: Re: Speedometer
Post by: Jim Shaw on May 27, 2010, 05:53:00 PM

Thanks George I will check mine.
Jim