BAC Forum

General Boards => Technical Support => Topic started by: Dale Walker on May 01, 2016, 03:35:02 AM

Title: Key pad problem
Post by: Dale Walker on May 01, 2016, 03:35:02 AM

Hi guys, my key pad hasn't been working on my coach, since I bought it, and would like to get it working.

I pulled the wires out and found the reset button, when I pushed it to reset it it beeped and the pad lite up. So I did as the book says, pushed the button, waited for the beeps, put my ID that I wanted, but it didn't work. I tried the 559 code to try and lock the door, but it didn't work. Question, if the pad lights up, does that indicate that it is operational? Is the pad supposed to be lit all the time the master switch for power is on?

Thanks in advance.

Title: Re: Key pad problem
Post by: Jim Nichols on May 01, 2016, 05:33:37 AM

Ours lights up and beeps when the numbers are pushed. The problem we had was when cold it was really hard to push those numbers. If the sun was warming it it was easy. The button switch was in the  4x4 panel low next to the passenger seat.

Title: Re: Key pad problem
Post by: Dale Walker on May 01, 2016, 06:53:30 AM

Thanks Jim, I had the panel off, that's were the reset button was. The thing lights and beeps but beyond that, nothing. One thing you just alerted me to, is when you touch the buttons on the panel, it doesn't beep. Probably it's fubared? Probably due for a new key pad?