BAC Forum

General Boards => Technical Support => Topic started by: Robert Wagner on November 17, 2016, 04:07:30 PM

Title: DS slide not coming all the in at the top
Post by: Robert Wagner on November 17, 2016, 04:07:30 PM

DS SLIDE IN FRONT Area is not coming all the way in at the top. It doesn't stay out much but it is out almost an inch.

Any ideas

Title: Re: DS slide not coming all the in at the top
Post by: Joel Ashley on November 17, 2016, 10:47:26 PM

If it's just at one top corner, I guess before I'd get into possible mechanical causes I'd put the slide out, get a ladder, and check that there's not some sort of debris, like a piece of wood or cone, that got under the slideout cover and is jamming it in one spot.

Joel

Title: Re: DS slide not coming all the in at the top
Post by: Gerald Farris on November 18, 2016, 01:42:10 PM

Robert.
First, check for a foreign object on top of the slide as Joel suggest. Then move the coach to a level area an extend and retract the slide with the coach at ride height to be sure that the slide is not binding from uneven stress on the chassis. If that does not correct your issue, check the rollers under the slide or for any foreign objects under the slide.

Gerald