BAC Forum

General Boards => Technical Support => Topic started by: Bill Stireman on September 22, 2010, 09:09:19 PM

Title: slide out problem
Post by: Bill Stireman on September 22, 2010, 09:09:19 PM

I have an '04 Monterey with 4 slides.   My problem is that one of the exterior locks on the main slide (LR) has been sticking and got bent.  I had to remove the black plastic mechanism cover in order to remove the lock to get it straightened out.  There are a number of plastic push "rivets" which hold the plastic cover in place.  Removing them pretty much destroys them.  Can anyone tell me where I can get a supply of these little plastic rivets?

Bill Stireman
'04 Monterey
C9 Cat

Title: Re: slide out problem
Post by: David Rudisill on September 23, 2010, 09:24:51 PM

This looks like them (in white, though): http://www.dyersonline.com/ap-products-almond-plastic-rivet.html

If you do a search on eBay for "plastic rivets", I'll bet one of those will be an exact match.

Title: Re: slide out problem
Post by: Joel Ashley on September 23, 2010, 09:29:26 PM

Check this thread in the Forum, http://forum.bacrallies.com/m-1272744450/s-5/highlight-slide+cover/#num5, then look up Willis Lott's email or number in the BAC or FMCA Directory;  he may be able to help.

-Joel

Title: Re: slide out problem
Post by: Bill Stireman on September 23, 2010, 10:06:04 PM

thanks everyone - I found them at Ace Hardware.

Bill Stireman
'04 Monterey
C9 Cat