BAC Forum
General Boards => Technical Support => Topic started by: jeffprupis on November 24, 2016, 02:27:15 PM
-
We have a 50A Hardwire - Model 40250-RVC Automatic Transfer Switch in our '05 Bev. Question is do we need anything else between the pedestal and coach? Do we need to check wiring before plugging in to pedestal or will 40250 protect our coach. Thanks and Happy Turkey Day.
-
Theoretically thats all you need. Having had my coach damaged once (no surge protector) I also use a portable to check before I hook up and as double protection while hooked up.
-
Jeff,
The Surge protector should be sufficient. However. like Jerry, I use a (home built) checker to verify the pedestal prior to plugging in. Mine can be built for ~$30 with parts from Home Depot/Lowes/Harbor Freight. See attachments for info.
Steve
-
Several times we've encountered park electrical supply issues, and a couple of times low-amp voltage drop and adapter short circuit problems, but our SurgeGuard transfer switch kept the coach unharmed. Once it was a problem convincing the park owner/manager that the problem was his equipment and not ours, so having a quality, well-featured voltmeter on hand and some basic knowledge of circuitry is always advisable.
Steve's or other testing device is a good idea; some dedicated to just source testing are available at RV suppliers, and are small enough to be kept handy with or near your power cord cabinet. Admittedly I've been lazy about checking campsite outlets like I should, unless it looks old or disheveled. But the SurgeGuard's performance thus far has jaded my concern a bit.
Joel
-
Good job Steve, simple and effective. A good rainy day project.....
Later Ed