BAC Forum

General Boards => Technical Support => Topic started by: Darrell Terry on May 03, 2017, 03:46:43 PM

Title: Fuses for brake,stop, and turn signals ?
Post by: Darrell Terry on May 03, 2017, 03:46:43 PM

Where are the 12 volt fuses located for RV lighting like turn signals, brake lights, and marker lights on a 2004 Monterey ?

Thanks in advance
Darrell

Title: Re: Fuses for brake,stop, and turn signals ?
Post by: Steve Huber on May 03, 2017, 05:26:42 PM

Darrell,
I think your coach uses thermal circuit breakers rather than fuses. They are located in the electrical bay (front bay on driver's side). You can check that you are getting voltage on the appropriate terminal posts to the right of the circuit breakers.
Steve

Title: Re: Fuses for brake,stop, and turn signals ?
Post by: Darrell Terry on May 04, 2017, 03:37:19 PM

Thanks Steve,
 Was helping out a fellow Beaver owner in Redmond,OR. (03 Monterey)
Turned out his RV and car were wired by 2 different tech's in 2 different States and this was first time he connected both for towing.
 
Darrell