BAC Forum
General Boards => Technical Support => Topic started by: Allen Hughes on July 15, 2017, 09:42:06 PM
-
Been searching for the 20A inline fuse that goes to the 4 pin connector. Any help would be greatly appreciated.
-
Allen,
It should be in the front electrical bay. If your chassis is non-multiplex, it will be a circuit breaker on attached to the battery buss. If you have a multiplex unit, it is one of 2 20A fuses. On my 07 they are fuses 60 (step ign) and 61 (step battery).
Steve
-
Thanks Steve. Heat are the distinguishing features between a multiplex and non multiplex chassis.