BAC Forum

General Boards => Technical Support => Topic started by: Laurel Moore on September 05, 2017, 11:55:02 PM

Title: Aqua hot
Post by: Laurel Moore on September 05, 2017, 11:55:02 PM

I have a2009 beaver with a aqua hot 450DE.my question is the best way to remove the low water cut off switch. It seems to have threads,before I use a lot of pressure  on it  I wanted know if this is correct?

Title: Re: Aqua hot
Post by: Neal E Weinmann on September 06, 2017, 12:38:00 AM

Perhaps this may help:

http://www.aquahot.com/files/service_manual/450-DE2%20Service%20Manual%20Rev%20C.pdf (http://www.aquahot.com/files/service_manual/450-DE2%20Service%20Manual%20Rev%20C.pdf)

Title: Re: Aqua hot
Post by: Laurel Moore on September 06, 2017, 02:24:40 AM

Thanks Neal looks like I may need a controller per the service manual

Title: Re: Aqua hot
Post by: Stan Simpson on September 06, 2017, 05:35:42 PM

Quote from: Laurel Moore on September 06, 2017, 02:24:40 AM

Thanks Neal looks like I may need a controller per the service manual

Laurel,

If it's this controller you are referring to, its pretty pricey at Aqua Hot and BCS. Here is a source that is much less.

McCoy Freightliner
Brooks Division
4060 Insterstate Pl NE
Brooks, OR
503-463-6303
2 years ago, including freight to Florida - $567.68