BAC Forum
General Boards => Technical Support => Topic started by: Dale Malquist on September 08, 2017, 11:43:21 PM
-
Trying to get under way yesterday the drivers side shade would no go up. I found a nest of wire behind drivers side upper cabinet. I think I need to get to the back of the front tv. How do I get it out?
-
Dale,
Can you access the needed connections by removing the metal panel on the back side of the cabinet?
Steve
-
No. I have taken out all the screws I see in the drivers side cabinet. The inside is wood and won't come loose. This is the biggest rats nest of wire I have ever seen.
-
Dale,
Not clear what problem you are trying to solve. Shades are self contained units mounted by 2 screws on each end. Wiring appears to run from each shade to switches in driver's console. if you are looking for a fuse, it should be 85 in the front electrical bay.
If it is a TV wiring problem, you can access the TV wiring on the back of the TV by removing the panel at the back of the TV cabinet. See pics.
Steve
-
In searching for the shade wire I must have pulled loose the cable that goes from the receiver to the tv. Your picture does not look like my coach. I do not see a vent like that.
Rained in today and have time to work on it.