BAC Forum

General Boards => Technical Support => Topic started by: Joe Westbrook on November 06, 2017, 06:04:12 PM

Title: Lost 12v power too ignition
Post by: Joe Westbrook on November 06, 2017, 06:04:12 PM

Replacing slide & leveling jack motor , while working I had motor running in and out and lost 12v power ,can not find out what happen!  No power too ignition too start engine. Would like any help I can get !  Also need wiring for pump . Thanks JOE 2001 Marquis

Title: Re: Lost 12v power too ignition
Post by: Joel Ashley on November 06, 2017, 07:43:04 PM

First thoughts go to the solenoid on the bottom center of the back wall in your electric bay.  Check that both large posts get voltage when the ignition is in the ON position.

Joel

Title: Re: Lost 12v power too ignition
Post by: Gerald Farris on November 07, 2017, 03:51:51 AM

Joe,
It sounds like the high amperage chassis battery fuse failed. It should be located on the panel above your batteries.

Gerald