BAC Forum

General Boards => Technical Support => Topic started by: Bobby Kirk on January 07, 2018, 03:34:47 PM

Title: Intellitec Module Replacement
Post by: Bobby Kirk on January 07, 2018, 03:34:47 PM

I have a 2006 Beaver Marquis.  Anyone have a source to buy these modules. Saw one on thread a few weeks ago and now i
cant find it.  Thanks for the help.

Title: Re: Intellitec Module Replacement
Post by: Mike Humble on January 07, 2018, 04:52:25 PM

I think I picked up at a seminar that these modules are not plug and play.  They need to have a professional installation.  You might want to check this out.
Mike

Title: Re: Intellitec Module Replacement
Post by: Bobby Kirk on January 07, 2018, 05:39:27 PM

The modules have to be programed so do the key pads.  Thanks

Title: Re: Intellitec Module Replacement
Post by: Bobby Kirk on January 10, 2018, 12:23:10 AM

Just for information the Modules do not have to be programed just set the dip switches.

Title: Re: Intellitec Module Replacement
Post by: Mike Humble on January 10, 2018, 01:19:22 AM

That is good info.
Mike

Title: Re: Intellitec Module Replacement
Post by: Larry Dedrick on January 11, 2018, 03:40:02 PM

Bobby
     I have dealt with the multiplex system several times. It would be helpful to know what problem you are having. There is a chassis multiplex system which is basically the driver and passenger function switches, the there is the coach (house) multiplex system which is manufactured by Intellitec. The technical helpline is 419-965-3014. Chris and Mark Bayus (M&M electronics) provide the technical for Intellitec. I talked to Chris recently and he was extremely helpful and knowledgable on the Intellitec multiplex system.
    Please pass on the problem you are having to benefit those of us that have the same system.
     Thanks,   Larry D