BAC Forum
General Boards => Technical Support => Topic started by: Lee Welbanks on January 15, 2018, 10:35:45 PM
-
I know some one in this forum knows who is the mfg of these basement door latches from my 06 Beaver PT Thunder.
I don't need one but would like to know the info if ever needed. There are no name or anything on it except a series of numbers. (13111 02 36X) All but the front two large doors have key lock they don't fuel and propane tanks inside.
-
You can always call the usual suspects: BCS in Bend, I'm sure they can tell you. Or NW RV Supply in Eugene. Or Monaco Parts, they know who made stuff, and if its still available.
-
You can always call the usual suspects: BCS in Bend, I'm sure they can tell you. Or NW RV Supply in Eugene. Or Monaco Parts, they know who made stuff, and if its still available.
Bill, Yeah I can call all the normal places and see if they have a clue, I just thought that somebody in here would know who makes these pieces. I can't ever see having to replace one as these are a really well made piece.
The search goes on, I just like to know where these pieces are made.
-
Could be hard to find if you ever needed it, Lee, but I ferreted out a couple leads. Northwest RV Supply lists it as out of stock at the moment. Much easier to find is the more globular style found on models a few steps up or more contemporary than our ‘06 Monterey.
http://www.nwrvsupply.com/product/13111-02.html
https://www.industrialhwe.com/images/Eberhard%20Locking%20Paddle%20Latch-Flush%20Mounted.pdf
-Joel
-
Joel, you hit it Eberhard is who makes them. I have actually used there hardware before in cabinets for trucks. Thanks for the info. I knew the forum would shine through.