BAC Forum

General Boards => Technical Support => Topic started by: George Frudakis on January 30, 2018, 01:24:36 AM

Title: Generator shut dow when ac units start run
Post by: George Frudakis on January 30, 2018, 01:24:36 AM

start generator put both ac unites on, after a short time the generator stops running. start it a gain when both ac unites start the generator shut down and the start switch by the driver seat blinks.

Title: Re: Generator shut dow when ac units start run
Post by: Gerald Farris on January 30, 2018, 02:20:01 AM

George,
There is no way to tell what your problem is from your description, but the blinking light on the switch is displaying a fault code. So if you look at your Onan operator's manual for fault codes (page 30 in most manuals), you can determine what your fault code is and that will help determine if you have a generator problem or an A/C unit that is drawing too many amps and killing the generator.

Gerald

Title: Re: Generator shut dow when ac units start run
Post by: George Frudakis on January 30, 2018, 02:16:45 PM

thank you