BAC Forum

General Boards => Technical Support => Topic started by: Allen Hughes on March 18, 2018, 03:54:28 PM

Title: Generator exhaust extension
Post by: Allen Hughes on March 18, 2018, 03:54:28 PM

Any one added a generator exhaust extension without drilling holes in the coach to secure it?

Title: Re: Generator exhaust extension
Post by: Mike Humble on March 18, 2018, 04:40:54 PM

If you are talking about a Genturi to exhaust upwards, we secure it part way up with a bungee and a couple of suction cups attached to the drivers side window.
Mike

Title: Re: Generator exhaust extension
Post by: Allen Hughes on March 18, 2018, 08:35:39 PM

Thanks Mike, that is exactly what I am looking for.

Title: Re: Generator exhaust extension
Post by: Roy Warren Co-Admin on March 19, 2018, 01:58:32 AM

On our Genturi, I have to take the chrome tip off and then it fits onto the exhaust pipe.  I drilled to holes into the exhaust pipe to hold it in place with a 3 inch screw thru the genturi and the exhaust pipe.  I also use plumber's tape to help hold the weight so that it won't cause damage to where the exhaust pipe connects to the generator.
Roy Warren

Title: Re: Generator exhaust extension
Post by: Dan Murphy on March 19, 2018, 01:32:22 PM

Allen you may want to look at this product


http://gostikproducts.com/model-gostack/

Title: Re: Generator exhaust extension
Post by: Jerry Carr on March 19, 2018, 09:30:07 PM

Allen we did ours with suction cups/Bungee  it worked well but I did drill a hole and used a locking pin

Title: Re: Generator exhaust extension
Post by: Neal E Weinmann on March 19, 2018, 11:11:04 PM

CAMCO makes a suction cup set that replaces the original anchors. The model number is 44850. I have been using them with generally positive results. Like any suction cup device, a clean surface is necessary.