BAC Forum

General Boards => Technical Support => Topic started by: Tim Manninen on June 20, 2018, 02:10:49 PM

Title: Sealand toilet won't flush
Post by: Tim Manninen on June 20, 2018, 02:10:49 PM

Hi All, We are newbies. We purchased a 2005 Beaver Monterey 40' C9 400 hp with 4 slides. This is our first coach and are a bit overwhelmed. We have a Sealand toilet model # 3010 that won't flush. The circuit board has 3 solid light and one flashing light.
Also the water level gauge on the Aladdin and on the water manifold both read 100% and are stuck there when the tank is only half full.
Any help would be greatly appreciated.
Tim

Title: Re: Sealand toilet won't flush
Post by: Mike Shumack on June 20, 2018, 02:51:17 PM

I have a manual - but it's a tad too large to attach here. PM me your e-mail and I'll send it to you.

Here's a snippet from the manual. Note the "reset" instructions in the first paragraph.