BAC Forum

General Boards => Technical Support => Topic started by: Ray Kaminsky on February 13, 2011, 05:18:26 PM

Title: Dim Under Cabinet Lights
Post by: Ray Kaminsky on February 13, 2011, 05:18:26 PM

In our 2007 Beaver Contessa Pacifica floor plan, our Under Cabinet Lights over our sink area illuminate but very dimly.  They had previously worked fine for many months. These are 10W halogen bulbs. All bulbs illuminate at same dim level.  Any ideas on how we can restore full power lighting?

Title: Re: Dim Under Cabinet Lights
Post by: Ken Buck on February 14, 2011, 02:48:26 AM

Are you aware that you may have a dimming feature? Push and hold the button in and there are 7 different levels of illumination. At least in mine there are.....

Ken

Title: Re: Dim Under Cabinet Lights
Post by: Ray Kaminsky on February 14, 2011, 08:40:42 PM

Great response on the "dimmer feature".  That was exactly the problem and we were able to restore the lighting to its "normal" level.  I am kind of surprised that this is an Undocumented Feature not mentioned in the owner manual.  Thanks!!!! :)